Call for objections: revision of keyword classification - Mailing list pgsql-patches
| From | Tom Lane |
|---|---|
| Subject | Call for objections: revision of keyword classification |
| Date | |
| Msg-id | 18112.1005266684@sss.pgh.pa.us Whole thread Raw |
| Responses |
Re: Call for objections: revision of keyword classification
|
| List | pgsql-patches |
Since we've already seen two complaints about "timestamp" no longer
being an allowed column name in 7.2, I think it's probably time to
make a serious effort at trimming the reserved-word list a little.
The attached patch de-reserves all these former ColLabels:
ABORT unrestricted
BIT can be ColId, but not function name
CHAR can be ColId, but not function name
CHARACTER can be ColId, but not function name
CLUSTER unrestricted
COPY unrestricted
DEC can be ColId, but not function name
DECIMAL can be ColId, but not function name
EXPLAIN unrestricted
FLOAT can be ColId, but not function name
GLOBAL unrestricted
INOUT unrestricted
INTERVAL can be ColId, but not function name
LISTEN unrestricted
LOAD unrestricted
LOCAL unrestricted
LOCK unrestricted
MOVE unrestricted
NCHAR can be ColId, but not function name
NUMERIC can be ColId, but not function name
OUT unrestricted
PRECISION unrestricted
RESET unrestricted
SETOF can be ColId, but not type or function name
SHOW unrestricted
TIME can be ColId, but not function name
TIMESTAMP can be ColId, but not function name
TRANSACTION unrestricted
UNKNOWN unrestricted
VACUUM unrestricted
VARCHAR can be ColId, but not function name
The ones that are now unrestricted were just low-hanging fruit (ie,
they probably should never have been in ColLabel in the first place).
The rest were fixed by recognizing that just because something couldn't
be a function name didn't mean it couldn't be used as a table or column
name. This solves the fundamental shift/reduce conflict posed by cases
like "SELECT TIMESTAMP(3 ...", without also preventing people from
continuing to name their columns "timestamp".
The keyword classification now looks like:
TypeFuncId: IDENT plus all fully-unrestricted keywords
ColId: TypeFuncId plus type-name keywords that might be
followed by '('; these can't be allowed to be
function names, but they can be column names.
func_name: TypeFuncId plus a few special-case ColLabels
(this list could probably be extended further)
ColLabel: ColId plus everything else
Comments? I'd like to apply this, unless there are objections.
I suppose Peter might complain about having to redo the keyword
tables ;-)
regards, tom lane
*** src/backend/parser/gram.y.orig Mon Nov 5 00:00:14 2001
--- src/backend/parser/gram.y Thu Nov 8 19:00:24 2001
***************
*** 257,264 ****
%type <paramno> ParamNo
%type <typnam> Typename, SimpleTypename, ConstTypename
! GenericType, Numeric, Geometric, Character, ConstDatetime, ConstInterval, Bit
! %type <str> character, datetime, bit
%type <str> extract_arg
%type <str> opt_charset, opt_collate
%type <str> opt_float
--- 257,264 ----
%type <paramno> ParamNo
%type <typnam> Typename, SimpleTypename, ConstTypename
! GenericType, Numeric, Character, ConstDatetime, ConstInterval, Bit
! %type <str> character, bit
%type <str> extract_arg
%type <str> opt_charset, opt_collate
%type <str> opt_float
***************
*** 268,274 ****
%type <ival> Iconst
%type <str> Sconst, comment_text
%type <str> UserId, opt_boolean, var_value, ColId_or_Sconst
! %type <str> ColId, ColLabel, TokenId
%type <node> zone_value
%type <node> TableConstraint
--- 268,274 ----
%type <ival> Iconst
%type <str> Sconst, comment_text
%type <str> UserId, opt_boolean, var_value, ColId_or_Sconst
! %type <str> ColId, TypeFuncId, ColLabel
%type <node> zone_value
%type <node> TableConstraint
***************
*** 1007,1017 ****
;
! constraints_set_namelist: IDENT
{
$$ = makeList1($1);
}
! | constraints_set_namelist ',' IDENT
{
$$ = lappend($1, $3);
}
--- 1007,1017 ----
;
! constraints_set_namelist: ColId
{
$$ = makeList1($1);
}
! | constraints_set_namelist ',' ColId
{
$$ = lappend($1, $3);
}
***************
*** 2007,2014 ****
}
;
def_arg: func_return { $$ = (Node *)$1; }
- | TokenId { $$ = (Node *)makeString($1); }
| all_Op { $$ = (Node *)makeString($1); }
| NumericOnly { $$ = (Node *)$1; }
| Sconst { $$ = (Node *)makeString($1); }
--- 2007,2014 ----
}
;
+ /* Note: any simple identifier will be returned as a type name! */
def_arg: func_return { $$ = (Node *)$1; }
| all_Op { $$ = (Node *)makeString($1); }
| NumericOnly { $$ = (Node *)$1; }
| Sconst { $$ = (Node *)makeString($1); }
***************
*** 2629,2639 ****
}
;
func_type: Typename
{
$$ = $1;
}
! | IDENT '.' ColId '%' TYPE_P
{
$$ = makeNode(TypeName);
$$->name = $1;
--- 2629,2643 ----
}
;
+ /*
+ * We would like to make the second production here be ColId '.' ColId etc,
+ * but that causes reduce/reduce conflicts. TypeFuncId is next best choice.
+ */
func_type: Typename
{
$$ = $1;
}
! | TypeFuncId '.' ColId '%' TYPE_P
{
$$ = makeNode(TypeName);
$$->name = $1;
***************
*** 4064,4076 ****
ConstTypename: GenericType
| Numeric
- | Geometric
| Bit
| Character
| ConstDatetime
;
! GenericType: IDENT
{
$$ = makeNode(TypeName);
$$->name = xlateSqlType($1);
--- 4068,4079 ----
ConstTypename: GenericType
| Numeric
| Bit
| Character
| ConstDatetime
;
! GenericType: TypeFuncId
{
$$ = makeNode(TypeName);
$$->name = xlateSqlType($1);
***************
*** 4086,4092 ****
Numeric: FLOAT opt_float
{
$$ = makeNode(TypeName);
! $$->name = xlateSqlType($2);
$$->typmod = -1;
}
| DOUBLE PRECISION
--- 4089,4095 ----
Numeric: FLOAT opt_float
{
$$ = makeNode(TypeName);
! $$->name = $2; /* already xlated */
$$->typmod = -1;
}
| DOUBLE PRECISION
***************
*** 4115,4128 ****
}
;
- Geometric: PATH_P
- {
- $$ = makeNode(TypeName);
- $$->name = xlateSqlType("path");
- $$->typmod = -1;
- }
- ;
-
opt_float: '(' Iconst ')'
{
if ($2 < 1)
--- 4118,4123 ----
***************
*** 4299,4311 ****
| /*EMPTY*/ { $$ = NULL; }
;
! ConstDatetime: datetime
! {
! $$ = makeNode(TypeName);
! $$->name = xlateSqlType($1);
! $$->typmod = -1;
! }
! | TIMESTAMP '(' Iconst ')' opt_timezone_x
{
$$ = makeNode(TypeName);
if ($5)
--- 4294,4300 ----
| /*EMPTY*/ { $$ = NULL; }
;
! ConstDatetime: TIMESTAMP '(' Iconst ')' opt_timezone_x
{
$$ = makeNode(TypeName);
if ($5)
***************
*** 4371,4384 ****
}
;
- datetime: YEAR_P { $$ = "year"; }
- | MONTH_P { $$ = "month"; }
- | DAY_P { $$ = "day"; }
- | HOUR_P { $$ = "hour"; }
- | MINUTE_P { $$ = "minute"; }
- | SECOND_P { $$ = "second"; }
- ;
-
/* XXX Make the default be WITH TIME ZONE for 7.2 to help with database upgrades
* but revert this back to WITHOUT TIME ZONE for 7.3.
* Do this by simply reverting opt_timezone_x to opt_timezone - thomas 2001-09-06
--- 4360,4365 ----
***************
*** 5270,5278 ****
* - thomas 2001-04-12
*/
! extract_arg: datetime { $$ = $1; }
! | SCONST { $$ = $1; }
! | IDENT { $$ = $1; }
;
/* position_list uses b_expr not a_expr to avoid conflict with general IN */
--- 5251,5264 ----
* - thomas 2001-04-12
*/
! extract_arg: IDENT { $$ = $1; }
! | YEAR_P { $$ = "year"; }
! | MONTH_P { $$ = "month"; }
! | DAY_P { $$ = "day"; }
! | HOUR_P { $$ = "hour"; }
! | MINUTE_P { $$ = "minute"; }
! | SECOND_P { $$ = "second"; }
! | SCONST { $$ = $1; }
;
/* position_list uses b_expr not a_expr to avoid conflict with general IN */
***************
*** 5555,5586 ****
attr_name: ColId { $$ = $1; };
class: ColId { $$ = $1; };
index_name: ColId { $$ = $1; };
-
- /* Functions
- * Include date/time keywords as SQL92 extension.
- * Include TYPE as a SQL92 unreserved keyword. - thomas 1997-10-05
- * Any tokens which show up as operators will screw up the parsing if
- * allowed as identifiers, but are acceptable as ColLabels:
- * BETWEEN, IN, IS, ISNULL, NOTNULL, OVERLAPS
- * Thanks to Tom Lane for pointing this out. - thomas 2000-03-29
- * We need OVERLAPS allowed as a function name to enable the implementation
- * of argument type variations on the underlying implementation. These
- * variations are done as SQL-language entries in the pg_proc catalog.
- * Do not include SUBSTRING here since it has explicit productions
- * in a_expr to support the goofy SQL9x argument syntax.
- * - thomas 2000-11-28
- */
- func_name: ColId { $$ = xlateSqlFunc($1); }
- | BETWEEN { $$ = xlateSqlFunc("between"); }
- | ILIKE { $$ = xlateSqlFunc("ilike"); }
- | IN { $$ = xlateSqlFunc("in"); }
- | IS { $$ = xlateSqlFunc("is"); }
- | ISNULL { $$ = xlateSqlFunc("isnull"); }
- | LIKE { $$ = xlateSqlFunc("like"); }
- | NOTNULL { $$ = xlateSqlFunc("notnull"); }
- | OVERLAPS { $$ = xlateSqlFunc("overlaps"); }
- ;
-
file_name: Sconst { $$ = $1; };
/* Constants
--- 5541,5546 ----
***************
*** 5692,5718 ****
Sconst: SCONST { $$ = $1; };
UserId: ColId { $$ = $1; };
! /* Column identifier
! * Include date/time keywords as SQL92 extension.
! * Include TYPE as a SQL92 unreserved keyword. - thomas 1997-10-05
! * Add other keywords. Note that as the syntax expands,
! * some of these keywords will have to be removed from this
! * list due to shift/reduce conflicts in yacc. If so, move
! * down to the ColLabel entity. - thomas 1997-11-06
! */
! ColId: IDENT { $$ = $1; }
! | datetime { $$ = $1; }
! | TokenId { $$ = $1; }
! | NATIONAL { $$ = "national"; }
| NONE { $$ = "none"; }
! | PATH_P { $$ = "path"; }
;
! /* Parser tokens to be used as identifiers.
! * Tokens involving data types should appear in ColId only,
! * since they will conflict with real TypeName productions.
*/
! TokenId: ABSOLUTE { $$ = "absolute"; }
| ACCESS { $$ = "access"; }
| ACTION { $$ = "action"; }
| ADD { $$ = "add"; }
--- 5652,5729 ----
Sconst: SCONST { $$ = $1; };
UserId: ColId { $$ = $1; };
! /* Column identifier --- names that can be column, table, etc names.
! *
! * This contains the TypeFuncId list plus those keywords that conflict
! * only with typename productions, not with other uses. Note that
! * most of these keywords will in fact be recognized as type names too;
! * they just have to have special productions for the purpose.
! *
! * Most of these cannot be in TypeFuncId (ie, are not also usable as function
! * names) because they can be followed by '(' in typename productions, which
! * looks too much like a function call for a LALR(1) parser.
! */
! ColId: TypeFuncId { $$ = $1; }
! | BIT { $$ = "bit"; }
! | CHAR { $$ = "char"; }
! | CHARACTER { $$ = "character"; }
! | DEC { $$ = "dec"; }
! | DECIMAL { $$ = "decimal"; }
! | FLOAT { $$ = "float"; }
! | INTERVAL { $$ = "interval"; }
! | NCHAR { $$ = "nchar"; }
| NONE { $$ = "none"; }
! | NUMERIC { $$ = "numeric"; }
! | SETOF { $$ = "setof"; }
! | TIME { $$ = "time"; }
! | TIMESTAMP { $$ = "timestamp"; }
! | VARCHAR { $$ = "varchar"; }
! ;
!
! /* Function identifier --- names that can be function names.
! *
! * This contains the TypeFuncId list plus some ColLabel keywords
! * that are used as operators in expressions; in general such keywords
! * can't be ColId because they would be ambiguous with variable names,
! * but they are unambiguous as function identifiers.
! *
! * Do not include POSITION, SUBSTRING, etc here since they have explicit
! * productions in a_expr to support the goofy SQL9x argument syntax.
! * - thomas 2000-11-28
! */
! func_name: TypeFuncId { $$ = xlateSqlFunc($1); }
! | BETWEEN { $$ = xlateSqlFunc("between"); }
! | BINARY { $$ = xlateSqlFunc("binary"); }
! | CROSS { $$ = xlateSqlFunc("cross"); }
! | FREEZE { $$ = xlateSqlFunc("freeze"); }
! | FULL { $$ = xlateSqlFunc("full"); }
! | ILIKE { $$ = xlateSqlFunc("ilike"); }
! | IN { $$ = xlateSqlFunc("in"); }
! | INNER_P { $$ = xlateSqlFunc("inner"); }
! | IS { $$ = xlateSqlFunc("is"); }
! | ISNULL { $$ = xlateSqlFunc("isnull"); }
! | JOIN { $$ = xlateSqlFunc("join"); }
! | LEFT { $$ = xlateSqlFunc("left"); }
! | LIKE { $$ = xlateSqlFunc("like"); }
! | NATURAL { $$ = xlateSqlFunc("natural"); }
! | NOTNULL { $$ = xlateSqlFunc("notnull"); }
! | OUTER_P { $$ = xlateSqlFunc("outer"); }
! | OVERLAPS { $$ = xlateSqlFunc("overlaps"); }
! | PUBLIC { $$ = xlateSqlFunc("public"); }
! | RIGHT { $$ = xlateSqlFunc("right"); }
! | VERBOSE { $$ = xlateSqlFunc("verbose"); }
;
! /* Type/func identifier --- names that can be type and function names
! * (as well as ColIds --- ie, these are unreserved keywords).
! *
! * Every new keyword should be added to this list unless
! * doing so produces a shift/reduce or reduce/reduce conflict.
! * If so, make it a ColId, or failing that a ColLabel.
*/
! TypeFuncId: IDENT { $$ = $1; }
! | ABORT_TRANS { $$ = "abort"; }
! | ABSOLUTE { $$ = "absolute"; }
| ACCESS { $$ = "access"; }
| ACTION { $$ = "action"; }
| ADD { $$ = "add"; }
***************
*** 5731,5746 ****
--- 5742,5760 ----
| CHARACTERISTICS { $$ = "characteristics"; }
| CHECKPOINT { $$ = "checkpoint"; }
| CLOSE { $$ = "close"; }
+ | CLUSTER { $$ = "cluster"; }
| COMMENT { $$ = "comment"; }
| COMMIT { $$ = "commit"; }
| COMMITTED { $$ = "committed"; }
| CONSTRAINTS { $$ = "constraints"; }
+ | COPY { $$ = "copy"; }
| CREATE { $$ = "create"; }
| CREATEDB { $$ = "createdb"; }
| CREATEUSER { $$ = "createuser"; }
| CURSOR { $$ = "cursor"; }
| CYCLE { $$ = "cycle"; }
| DATABASE { $$ = "database"; }
+ | DAY_P { $$ = "day"; }
| DECLARE { $$ = "declare"; }
| DEFERRED { $$ = "deferred"; }
| DELETE { $$ = "delete"; }
***************
*** 5753,5768 ****
--- 5767,5786 ----
| ESCAPE { $$ = "escape"; }
| EXCLUSIVE { $$ = "exclusive"; }
| EXECUTE { $$ = "execute"; }
+ | EXPLAIN { $$ = "explain"; }
| FETCH { $$ = "fetch"; }
| FORCE { $$ = "force"; }
| FORWARD { $$ = "forward"; }
| FUNCTION { $$ = "function"; }
+ | GLOBAL { $$ = "global"; }
| GRANT { $$ = "grant"; }
| HANDLER { $$ = "handler"; }
+ | HOUR_P { $$ = "hour"; }
| IMMEDIATE { $$ = "immediate"; }
| INCREMENT { $$ = "increment"; }
| INDEX { $$ = "index"; }
| INHERITS { $$ = "inherits"; }
+ | INOUT { $$ = "inout"; }
| INSENSITIVE { $$ = "insensitive"; }
| INSERT { $$ = "insert"; }
| INSTEAD { $$ = "instead"; }
***************
*** 5771,5782 ****
--- 5789,5808 ----
| LANGUAGE { $$ = "language"; }
| LANCOMPILER { $$ = "lancompiler"; }
| LEVEL { $$ = "level"; }
+ | LISTEN { $$ = "listen"; }
+ | LOAD { $$ = "load"; }
+ | LOCAL { $$ = "local"; }
| LOCATION { $$ = "location"; }
+ | LOCK_P { $$ = "lock"; }
| MATCH { $$ = "match"; }
| MAXVALUE { $$ = "maxvalue"; }
+ | MINUTE_P { $$ = "minute"; }
| MINVALUE { $$ = "minvalue"; }
| MODE { $$ = "mode"; }
+ | MONTH_P { $$ = "month"; }
+ | MOVE { $$ = "move"; }
| NAMES { $$ = "names"; }
+ | NATIONAL { $$ = "national"; }
| NEXT { $$ = "next"; }
| NO { $$ = "no"; }
| NOCREATEDB { $$ = "nocreatedb"; }
***************
*** 5787,5796 ****
--- 5813,5825 ----
| OIDS { $$ = "oids"; }
| OPERATOR { $$ = "operator"; }
| OPTION { $$ = "option"; }
+ | OUT { $$ = "out"; }
| OWNER { $$ = "owner"; }
| PARTIAL { $$ = "partial"; }
| PASSWORD { $$ = "password"; }
+ | PATH_P { $$ = "path"; }
| PENDANT { $$ = "pendant"; }
+ | PRECISION { $$ = "precision"; }
| PRIOR { $$ = "prior"; }
| PRIVILEGES { $$ = "privileges"; }
| PROCEDURAL { $$ = "procedural"; }
***************
*** 5800,5805 ****
--- 5829,5835 ----
| RELATIVE { $$ = "relative"; }
| RENAME { $$ = "rename"; }
| REPLACE { $$ = "replace"; }
+ | RESET { $$ = "reset"; }
| RESTRICT { $$ = "restrict"; }
| RETURNS { $$ = "returns"; }
| REVOKE { $$ = "revoke"; }
***************
*** 5808,5818 ****
--- 5838,5850 ----
| RULE { $$ = "rule"; }
| SCHEMA { $$ = "schema"; }
| SCROLL { $$ = "scroll"; }
+ | SECOND_P { $$ = "second"; }
| SESSION { $$ = "session"; }
| SEQUENCE { $$ = "sequence"; }
| SERIALIZABLE { $$ = "serializable"; }
| SET { $$ = "set"; }
| SHARE { $$ = "share"; }
+ | SHOW { $$ = "show"; }
| START { $$ = "start"; }
| STATEMENT { $$ = "statement"; }
| STATISTICS { $$ = "statistics"; }
***************
*** 5823,5836 ****
--- 5855,5871 ----
| TEMPLATE { $$ = "template"; }
| TEMPORARY { $$ = "temporary"; }
| TOAST { $$ = "toast"; }
+ | TRANSACTION { $$ = "transaction"; }
| TRIGGER { $$ = "trigger"; }
| TRUNCATE { $$ = "truncate"; }
| TRUSTED { $$ = "trusted"; }
| TYPE_P { $$ = "type"; }
| UNENCRYPTED { $$ = "unencrypted"; }
+ | UNKNOWN { $$ = "unknown"; }
| UNLISTEN { $$ = "unlisten"; }
| UNTIL { $$ = "until"; }
| UPDATE { $$ = "update"; }
+ | VACUUM { $$ = "vacuum"; }
| VALID { $$ = "valid"; }
| VALUES { $$ = "values"; }
| VARYING { $$ = "varying"; }
***************
*** 5839,5859 ****
| WITH { $$ = "with"; }
| WITHOUT { $$ = "without"; }
| WORK { $$ = "work"; }
| ZONE { $$ = "zone"; }
;
! /* Column label
! * Allowed labels in "AS" clauses.
! * Include TRUE/FALSE SQL3 reserved words for Postgres backward
! * compatibility. Cannot allow this for column names since the
! * syntax would not distinguish between the constant value and
! * a column name. - thomas 1997-10-24
! * Add other keywords to this list. Note that they appear here
! * rather than in ColId if there was a shift/reduce conflict
! * when used as a full identifier. - thomas 1997-11-06
*/
ColLabel: ColId { $$ = $1; }
- | ABORT_TRANS { $$ = "abort"; }
| ALL { $$ = "all"; }
| ANALYSE { $$ = "analyse"; } /* British */
| ANALYZE { $$ = "analyze"; }
--- 5874,5893 ----
| WITH { $$ = "with"; }
| WITHOUT { $$ = "without"; }
| WORK { $$ = "work"; }
+ | YEAR_P { $$ = "year"; }
| ZONE { $$ = "zone"; }
;
! /* Column label --- allowed labels in "AS" clauses.
! *
! * Keywords should appear here if they could not be distinguished
! * from variable, type, or function names in some contexts.
! *
! * At present, every keyword except "AS" itself should appear in
! * one of ColId, TypeFuncId, or ColLabel. When adding a ColLabel,
! * also consider whether it can be added to func_name.
*/
ColLabel: ColId { $$ = $1; }
| ALL { $$ = "all"; }
| ANALYSE { $$ = "analyse"; } /* British */
| ANALYZE { $$ = "analyze"; }
***************
*** 5862,5887 ****
| ASC { $$ = "asc"; }
| BETWEEN { $$ = "between"; }
| BINARY { $$ = "binary"; }
- | BIT { $$ = "bit"; }
| BOTH { $$ = "both"; }
| CASE { $$ = "case"; }
| CAST { $$ = "cast"; }
- | CHAR { $$ = "char"; }
- | CHARACTER { $$ = "character"; }
| CHECK { $$ = "check"; }
- | CLUSTER { $$ = "cluster"; }
| COALESCE { $$ = "coalesce"; }
| COLLATE { $$ = "collate"; }
| COLUMN { $$ = "column"; }
| CONSTRAINT { $$ = "constraint"; }
- | COPY { $$ = "copy"; }
| CROSS { $$ = "cross"; }
| CURRENT_DATE { $$ = "current_date"; }
| CURRENT_TIME { $$ = "current_time"; }
| CURRENT_TIMESTAMP { $$ = "current_timestamp"; }
| CURRENT_USER { $$ = "current_user"; }
- | DEC { $$ = "dec"; }
- | DECIMAL { $$ = "decimal"; }
| DEFAULT { $$ = "default"; }
| DEFERRABLE { $$ = "deferrable"; }
| DESC { $$ = "desc"; }
--- 5896,5914 ----
***************
*** 5891,5915 ****
| END_TRANS { $$ = "end"; }
| EXCEPT { $$ = "except"; }
| EXISTS { $$ = "exists"; }
- | EXPLAIN { $$ = "explain"; }
| EXTRACT { $$ = "extract"; }
| FALSE_P { $$ = "false"; }
- | FLOAT { $$ = "float"; }
| FOR { $$ = "for"; }
| FOREIGN { $$ = "foreign"; }
| FREEZE { $$ = "freeze"; }
| FROM { $$ = "from"; }
| FULL { $$ = "full"; }
- | GLOBAL { $$ = "global"; }
| GROUP { $$ = "group"; }
| HAVING { $$ = "having"; }
| ILIKE { $$ = "ilike"; }
| IN { $$ = "in"; }
| INITIALLY { $$ = "initially"; }
| INNER_P { $$ = "inner"; }
- | INOUT { $$ = "inout"; }
| INTERSECT { $$ = "intersect"; }
- | INTERVAL { $$ = "interval"; }
| INTO { $$ = "into"; }
| IS { $$ = "is"; }
| ISNULL { $$ = "isnull"; }
--- 5918,5937 ----
***************
*** 5918,5936 ****
| LEFT { $$ = "left"; }
| LIKE { $$ = "like"; }
| LIMIT { $$ = "limit"; }
- | LISTEN { $$ = "listen"; }
- | LOAD { $$ = "load"; }
- | LOCAL { $$ = "local"; }
- | LOCK_P { $$ = "lock"; }
- | MOVE { $$ = "move"; }
| NATURAL { $$ = "natural"; }
- | NCHAR { $$ = "nchar"; }
| NEW { $$ = "new"; }
| NOT { $$ = "not"; }
| NOTNULL { $$ = "notnull"; }
| NULLIF { $$ = "nullif"; }
| NULL_P { $$ = "null"; }
- | NUMERIC { $$ = "numeric"; }
| OFF { $$ = "off"; }
| OFFSET { $$ = "offset"; }
| OLD { $$ = "old"; }
--- 5940,5951 ----
***************
*** 5938,5975 ****
| ONLY { $$ = "only"; }
| OR { $$ = "or"; }
| ORDER { $$ = "order"; }
- | OUT { $$ = "out"; }
| OUTER_P { $$ = "outer"; }
| OVERLAPS { $$ = "overlaps"; }
| POSITION { $$ = "position"; }
- | PRECISION { $$ = "precision"; }
| PRIMARY { $$ = "primary"; }
| PUBLIC { $$ = "public"; }
| REFERENCES { $$ = "references"; }
- | RESET { $$ = "reset"; }
| RIGHT { $$ = "right"; }
| SELECT { $$ = "select"; }
| SESSION_USER { $$ = "session_user"; }
- | SETOF { $$ = "setof"; }
- | SHOW { $$ = "show"; }
| SOME { $$ = "some"; }
| SUBSTRING { $$ = "substring"; }
| TABLE { $$ = "table"; }
| THEN { $$ = "then"; }
- | TIME { $$ = "time"; }
- | TIMESTAMP { $$ = "timestamp"; }
| TO { $$ = "to"; }
| TRAILING { $$ = "trailing"; }
- | TRANSACTION { $$ = "transaction"; }
| TRIM { $$ = "trim"; }
| TRUE_P { $$ = "true"; }
| UNION { $$ = "union"; }
| UNIQUE { $$ = "unique"; }
- | UNKNOWN { $$ = "unknown"; }
| USER { $$ = "user"; }
| USING { $$ = "using"; }
- | VACUUM { $$ = "vacuum"; }
- | VARCHAR { $$ = "varchar"; }
| VERBOSE { $$ = "verbose"; }
| WHEN { $$ = "when"; }
| WHERE { $$ = "where"; }
--- 5953,5979 ----
pgsql-patches by date: